Wet Sounds HTX-2 — Hydro-Tech X Series 2-Channel Class-D Marine Amplifier
The Wet Sounds HTX-2 is a full-range Class-D 2-channel marine amplifier delivering 300W per channel at 2Ω or 600W bridged to mono at 4Ω, built on the Hydro-Tech X Series platform. Completely sealed and saltwater-compliant with a high-mass heat sink, thermal overload protection, and flexible crossovers — a reliable, high-value amplifier for any marine audio system.
$970.00
The HTX-2 is part of Wet Sounds’ Hydro-Tech X Series — a 2-channel, full-range Class-D marine amplifier designed as a complete solution for extreme marine audio applications. Built to deliver outstanding performance at a strong value point, the HTX-2 is a well-balanced match for Wet Sounds speakers across the range and is engineered to hold up to the full demands of the marine environment — water, waves, vibration, and sun.
Two channels of full-range output deliver 150W per channel at 4Ω stereo, 300W per channel at 2Ω stereo, or 600W bridged to mono at 4Ω — making the HTX-2 equally capable as a dedicated tower speaker amplifier or a high-power subwoofer amplifier in bridged configuration. Flexible low-pass and subsonic filter crossovers are adjustable from 50Hz to 250Hz at 12dB per octave for precise frequency management, and input sensitivity is variable from 0.2V to 6.0V for compatibility with virtually any source unit. Remote attenuation is adjustable from +0.7dB to -29dB for convenient level control.
Class-D power supplies deliver superior efficiency and extreme output packed inside a small chassis, while a smart microprocessor and high-mass heat sink ensure reliable electronic performance and effective thermal management under sustained high-power operation. Thermal overload protection safeguards the amplifier when conditions demand it. Completely sealed and saltwater-compliant for long-term marine reliability. Supports Wet Sounds’ extensive CrossOver network. Backed by Wet Sounds’ 2-year limited warranty.
Specifications
- Channels: 2
- Amplifier class: Class-D
- RMS power @ 4Ω stereo: 150W × 2
- RMS power @ 2Ω stereo: 300W × 2
- RMS power @ 4Ω mono bridged: 600W × 1
- Frequency response: 20Hz – 20kHz (-3dB)
- S/N ratio: >60dB (1W @ 4Ω) / >99dB (125W @ 4Ω)
- Input sensitivity: 0.2V – 6.0V variable
- Crossover low pass: 50Hz – 250Hz, 12dB/octave
- Subsonic filter: 50Hz – 250Hz, 12dB/octave
- Remote attenuation: +0.7dB to -29dB
- Construction: Completely sealed, saltwater-compliant
- Heat sink: High-mass
- Protection: Thermal overload
